*NOTE
SERIES 6000 Manual Slide Door
SERIES 6001 Electrical Slide Door
FEATURES
-
Easy opening - Wide Wheel Spacing and smoth Track design makes opening effortless.
-
All Stainless Steel Door Capping, Hardware & Track Angle
-
Made to custom-designed applications
-
USDA approved
Therm-L-Tec's Single Horizontal Slide Door is by far the simplest and most fundamental door in the market for the last 30 plus years. When dependability is your primary concern, simple operation is very important. Therm-L-Tec's electric single sliding door has an absolute minimum of moving parts. Driven by a geared belt similar to the serpentine belt in your car means ongoing lubrication maintenance is eliminated.
Utilizing the fast opening "state of the art" S.S.T. operator, this single slide door is capable of opening faster then our competitor's door of the same size.
Options:
-
12 W / foot heat in doors and bottom sweep, additional heat in door frame available (total 24 W / foot heat)
-
Insulated vision panel (Heated on Freezer doors)
-
Flush Sill or High Sill
-
Meat Rail Provision
-
Pad Lock with Emergency Egress from inside
-
Stainless Steel Kick Plates
-
High R Value
-
Full Caustic Washdown
Standard Sizes (Custom options available):
-
Height - 7' - 24'
-
Width - 5' - 20'
-
Thickness - 4", 6"
SPECIFICATIONS
HORIZONTAL SLIDING COOLER/FREEZER DOORS
DIVISION 8 | SECTION 8325
1.01 | SCOPE
Work required under this section shall include the furnishing of all labor, materials, tools and equipment to complete insulated door work as detailed on drawings or as specified herein.
1.02 | SYSTEM DESCRIPTION
All doors, door casings shall be fully clad on all exposed surfaces with paint, white embossed or flat 26ga G90 galvanized steel. All hardware shall be protected against corrosion. Doors with provision for locking shall have safety release on opposite site.
1.03 | SUBMITTAL
In Compliance with specification requirements, submit shop drawings including all information required for complete installation, head jamb and sill conditions and electrical requirements.
1.04 | QUALITY ASSURANCE
Doors shall be installed in accordance with the architects plans and specifications and door manufacturer's written instructions, drawings and recommendations.
1.05 | DELIVERY, STORAGE & HANDLING
Each Door shall be adequately crated to protect door from damage during shipment and handling. Each crate shall be marked with door identification number. Inspect door for damage at time of receipt. Storage of door at jobsite to be protected from weather.
1.06 | WARRANTY
Doors shall be warranted against defective materials and workmanship for a period of one year.