FEATURES
-
Lightweight, easy entry
-
Stainless Steel door trim
-
Made to custom-designed applications
-
USDA approved
Therm-L-Tec's double swing cooler/freezer doors are suitable for a wide variety of applications. This door is most often used as a pedestrian traffic door for processors, dairies, freezers, laboratories, coolers or any controlled environment.
Therm-L-Tec doors are available in a wide variety of finishes. In all cases, the door comes trimmed with Stainless Steel, a chrome latch and cam lift hinges.
Options:
-
10 W / foot heat in doors gasket and bottom, additional heat in door frame available (total 20 W / foot heat)
-
Double swing equipment room door
-
Insulated vision panel
-
Flush Sill or High Sill
-
Door Closer
-
Meat Rail Provision
-
Panic hardware and pilfer proof screws
-
Exit only door
-
Stainless Steel Kick Plates
-
Stainless Steel Hardware
-
High R Value
-
Full Caustic Washdown
Standard Sizes (Custom options available):
-
Height - 2' 6" - 8'
-
Width - 2' 6" - 7'
-
Thickness - 4", 6"
SPECIFICATIONS
IN-FITTING COOLER / FREEZER DOORS
DIVISION 8 | SECTION 8325
1.01 | SCOPE
Work required under this section shall include the furnishing of all labor, materials, tools and equipment to complete insulated door work as detailed on drawings or as specified herein.
1.02 | SYSTEM DESCRIPTION
All doors, door casings shall be fully clad on all exposed surfaces with paint, white embossed or flat 26ga G90 galvanized steel. All hardware shall be protected against corrosion. Doors with provision for locking shall have safety release on opposite site.
1.03 | SUBMITTAL
In Compliance with specification requirements, submit shop drawings including all information required for complete installation, head jamb and sill conditions and electrical requirements.
1.04 | QUALITY ASSURANCE
Doors shall be installed in accordance with the architects plans and specifications and door manufacturer's written instructions, drawings and recommendations.
1.05 | DELIVERY, STORAGE & HANDLING
Each Door shall be adequately crated to protect door from damage during shipment and handling. Each crate shall be marked with door identification number. Inspect door for damage at time of receipt. Storage of door at jobsite to be protected from weather.
1.06 | WARRANTY
Doors shall be warranted against defective materials and workmanship for a period of one year.